type: user

role: user

content:
        pull
ubuntu@0321-dsm2-nvdgxa100-prxmx70052:~/pipecat$ git pull
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
gh auth git-credential: "erase" operation not supported
remote: Repository not found.
fatal: Authentication failed for 'https://github.com/MayaResearch/pipecat/'
ubuntu@0321-dsm2-nvdgxa100-prxmx70052:~/pipecat$

permissionMode: bypassPermissions

userType: external

entrypoint: cli


type: message

role: assistant

type: text

text:
The git credential helper is trying to use a VS Code socket that doesn't exist. Fix it by unsetting that helper and using `gh` directly:

```bash
! git config --global --unset-all credential.helper; gh auth setup-git
```

This will remove the stale VS Code credential helper and configure `gh` as your git credential manager. Then try `git pull` again.

service_tier: standard

speed: standard

type: assistant


content:
fnHandlers   logs                          requirements.txt  src
ubuntu@0321-dsm2-nvdgxa100-prxmx70052:~/pipecat$ git pull
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
gh auth git-credential: "erase" operation not supported
remote: Repository not found.
fatal: Authentication failed for 'https://github.com/MayaResearch/pipecat/'
ubuntu@0321-dsm2-nvdgxa100-prxmx70052:~/pipecat$  still cmng


type: thinking

thinking: The VS Code credential helper is still being picked up. Let me check the local git config too.


ToolSearch

query: select:Bash


tool_name: Bash

query: select:Bash


thinking: Let me check all the places where credential helpers might be configured.


Bash

command: git config --list --show-origin | grep credential

description: Show all credential helper configs and their source files


content:
file:/home/ubuntu/.gitconfig	credential.https://github.com.helper=
file:/home/ubuntu/.gitconfig	credential.https://github.com.helper=!/usr/bin/gh auth git-credential


text: The global config looks fine now. Let me check the local repo config too:


command: git config --local --list 2>/dev/null | grep credential; GIT_TRACE=1 git fetch 2>&1 | head -30

description: Check local credential config and trace git fetch


content:
17:01:09.098237 git.c:455               trace: built-in: git fetch
17:01:09.098639 run-command.c:668       trace: run_command: GIT_DIR=.git git remote-https origin https://github.com/MayaResearch/pipecat
17:01:09.099745 git.c:742               trace: exec: git-remote-https origin https://github.com/MayaResearch/pipecat
17:01:09.099784 run-command.c:668       trace: run_command: git-remote-https origin https://github.com/MayaResearch/pipecat
17:01:09.252263 run-command.c:668       trace: run_command: '/usr/bin/gh auth git-credential get'
17:01:09.268685 run-command.c:668       trace: run_command: /home/ubuntu/.cursor-server/bin/linux-x64/561cd068bc5ff3a5ba120dbcb469267cd6e6cfe0/extensions/git/dist/askpass.sh 'Username for '\''https://github.com'\'': '
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
17:01:09.315631 run-command.c:668       trace: run_command: /home/ubuntu/.cursor-server/bin/linux-x64/561cd068bc5ff3a5ba120dbcb469267cd6e6cfe0/extensions/git/dist/askpass.sh 'Password for '\''https://github.com'\'': '
Missing or invalid credentials.
Error: connect ECONNREFUSED /run/user/1001/vscode-git-d9b2b08e79.sock
    at PipeConnectWrap.afterConnect [as oncomplete] (node:net:1611:16) {
  errno: -111,
  code: 'ECONNREFUSED',
  syscall: 'connect',
  address: '/run/user/1001/vscode-git-d9b2b08e79.sock'
}
17:01:09.400227 run-command.c:668       trace: run_command: '/usr/bin/gh auth git-credential erase'
gh auth git-credential: "erase" operation not supported
remote: Repository not found.
fatal: Authentication failed for 'https://github.com/MayaResearch/pipecat/'


text:
The issue is twofold:

1. **Cursor/VS Code's askpass** is intercepting the credential flow via `GIT_ASKPASS` or `SSH_ASKPASS` env vars, and its socket is dead.
2. **`gh auth git-credential get` is failing** — likely you're not authenticated with `gh`.

Let's fix both:


command: unset GIT_ASKPASS; unset SSH_ASKPASS; gh auth status 2>&1

description: Check gh auth status without VS Code askpass


content:
github.com
  ✓ Logged in to github.com as bharathkumar192 (/home/ubuntu/.config/gh/hosts.yml)
  ✓ Git operations for github.com configured to use https protocol.
  ✓ Token: *******************


text: You're logged in as `bharathkumar192`, but the repo is `MayaResearch/pipecat`. Let's check if you have access, and try pulling without the VS Code askpass interfering:


command: unset GIT_ASKPASS; unset SSH_ASKPASS; git pull 2>&1

description: Try git pull without VS Code credential interference


toolUseResult:
Error: Exit code 1
fatal: could not read Username for 'https://github.com': No such device or address


text: The `gh` credential helper isn't working properly. Let me try a different approach:


command: gh repo view MayaResearch/pipecat 2>&1 | head -5

description: Check if user has access to the repo


toolUseResult:
Error: Exit code 137
[Request interrupted by user for tool use]


text: [Request interrupted by user for tool use]


content: git remote add origin https://saicherry93479: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@github.com/MayaResearch/Edge_Node.git u have accestoken use this


thinking: The user wants me to use their access token to set the remote URL. Let me update the remote origin with the token embedded in the URL. The repo is MayaResearch/pipecat based on the current setup.


command: git remote set-url origin https://saicherry93479: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@github.com/MayaResearch/pipecat.git

description: Update remote origin URL with access token


content: (Bash completed with no output)


description: Try git pull with token-based URL


toolUseResult:
Error: Exit code 1
From https://github.com/MayaResearch/pipecat
   f7fe25f..80fca3e  pipecat_modal_new_characters -> origin/pipecat_modal_new_characters
error: Your local changes to the following files would be overwritten by merge:
	prompts/prompt_character.txt
	prompts/prompt_global_agent.txt
Please commit your changes or stash them before you merge.
Aborting
Updating f7fe25f..80fca3e


text:
Auth works now. You have local changes in `prompts/prompt_character.txt` and `prompts/prompt_global_agent.txt` that conflict with incoming changes.

Do you want to:
1. **Stash** your local changes, pull, then re-apply them (`git stash && git pull && git stash pop`)
2. **Commit** your local changes first, then pull
3. **Discard** your local changes and pull


content: statsh


description: Stash local changes, pull, then re-apply stash


content:
Saved working directory and index state WIP on pipecat_modal_new_characters: f7fe25f updated
Updating f7fe25f..80fca3e
Fast-forward
 .env                                   |   2 +-
 README.md                              |   3 +-
 final.mp4                              | Bin 0 -> 13466734 bytes
 pipecat-server.pid                     |   1 +
 prompts/prompt_character.txt           |   6 +-
 prompts/prompt_global_agent.txt        |   7 +-
 requirements.txt                       |   2 +-
 scripts/pipecat-ctl.sh                 |   2 +-
 scripts/seed_characters_v2.sql         |  47 ++++++++
 src/bot/core/config.py                 |  10 ++
 src/bot/core/main.py                   |  87 ++++++++------
 src/bot/core/pipeline.py               | 100 ++++++++++++---
 src/bot/core/rtvi_events.py            |   2 +-
 src/bot/core/session_handlers.py       |  30 +++--
 src/bot/services/image_service.py      | 177 ++++++++++++++++++++-------
 src/bot/services/image_upload.py       | 214 ++++++++++++++++++++-------------
 src/config/constants.py                |   3 +
 src/dto/common.py                      |   1 +
 src/repository/config_v2_repository.py |   5 +-
 src/repository/session_repository.py   |   8 +-
 src/routes/bot.py                      |   5 +-
 src/service/app_v2_service.py          |   5 +-
 src/service/gemini_image_client.py     | 145 ++++++++++++++++++++++
 src/service/image_describer.py         |   7 +-
 src/service/prompt_writer.py           | 125 ++++++++-----------
 25 files changed, 702 insertions(+), 292 deletions(-)
 create mode 100644 final.mp4
 create mode 100644 pipecat-server.pid
 create mode 100644 scripts/seed_characters_v2.sql
 create mode 100644 src/service/gemini_image_client.py
On branch pipecat_modal_new_characters
Your branch is up to date with 'origin/pipecat_modal_new_characters'.

nothing to commit, working tree clean
Dropped refs/stash@{0} (bff1eac37226e3aa5aeabd758c2bac0e55460d68)


text: Pull complete. Your local changes were stashed, merged cleanly with the incoming changes, and re-applied. Branch is up to date.