/***************************************************************************** Perceptual Evaluation of Speech Quality (PESQ) ITU-T Recommendations P.862, P.862.1, P.862.2. Version 2.0 - October 2005. **************************************** PESQ Intellectual Property Rights Notice **************************************** DEFINITIONS: ------------ For the purposes of this Intellectual Property Rights Notice the terms �Perceptual Evaluation of Speech Quality Algorithm� and �PESQ Algorithm� refer to the objective speech quality measurement algorithm defined in ITU-T Recommendation P.862; the term �PESQ Software� refers to the C-code component of P.862. These definitions also apply to those parts of ITU-T Recommendation P.862.2 and its associated source code that are common with P.862. NOTICE: ------- All copyright, trade marks, trade names, patents, know-how and all or any other intellectual rights subsisting in or used in connection with including all algorithms, documents and manuals relating to the PESQ Algorithm and or PESQ Software are and remain the sole property in law, ownership, regulations, treaties and patent rights of the Owners identified below. The user may not dispute or question the ownership of the PESQ Algorithm and or PESQ Software. OWNERS ARE: ----------- 1. British Telecommunications plc (BT), all rights assigned to Psytechnics Limited 2. Royal KPN NV, all rights assigned to OPTICOM GmbH RESTRICTIONS: ------------- The user cannot: 1. alter, duplicate, modify, adapt, or translate in whole or in part any aspect of the PESQ Algorithm and or PESQ Software 2. sell, hire, loan, distribute, dispose or put to any commercial use other than those permitted below in whole or in part any aspect of the PESQ Algorithm and or PESQ Software PERMITTED USE: -------------- The user may: 1. Use the PESQ Software to: i) understand the PESQ Algorithm; or ii) evaluate the ability of the PESQ Algorithm to perform its intended function of predicting the speech quality of a system; or iii) evaluate the computational complexity of the PESQ Algorithm, with the limitation that none of said evaluations or its results shall be used for external commercial use. 2. Use the PESQ Software to test if an implementation of the PESQ Algorithm conforms to ITU-T Recommendation P.862. 3. With the prior written permission of both Psytechnics Limited and OPTICOM GmbH, use the PESQ Software in accordance with the above Restrictions to perform work that meets all of the following criteria: i) the work must contribute directly to the maintenance of an existing ITU recommendation or the development of a new ITU recommendation under an approved ITU Study Item; and ii) the work and its results must be fully described in a written contribution to the ITU that is presented at a formal ITU meeting within one year of the start of the work; and iii) neither the work nor its results shall be put to any commercial use other than making said contribution to the ITU. Said permission will be provided on a case-by-case basis. ANY OTHER USE OR APPLICATION OF THE PESQ SOFTWARE AND/OR THE PESQ ALGORITHM WILL REQUIRE A PESQ LICENCE AGREEMENT, WHICH MAY BE OBTAINED FROM EITHER OPTICOM GMBH OR PSYTECHNICS LIMITED. EACH COMPANY OFFERS OEM LICENSE AGREEMENTS, WHICH COMBINE OEM IMPLEMENTATIONS OF THE PESQ ALGORITHM TOGETHER WITH A PESQ PATENT LICENSE AGREEMENT. PESQ PATENT-ONLY LICENSE AGREEMENTS MAY BE OBTAINED FROM OPTICOM. *********************************************************************** * OPTICOM GmbH * Psytechnics Limited * * Naegelsbachstr. 38, * Fraser House, 23 Museum Street, * * D- 91052 Erlangen, Germany * Ipswich IP1 1HN, England * * Phone: +49 (0) 9131 53020 0 * Phone: +44 (0) 1473 261 800 * * Fax: +49 (0) 9131 53020 20 * Fax: +44 (0) 1473 261 880 * * E-mail: info@opticom.de, * E-mail: info@psytechnics.com, * * www.opticom.de * www.psytechnics.com * *********************************************************************** Further information is also available from www.pesq.org *****************************************************************************/ #include #include #ifndef TRUE #define TRUE 1 #endif #ifndef FALSE #define FALSE 0 #endif #ifndef LINIIR #define LINIIR 60 #endif #ifndef MAXNUTTERANCES #define MAXNUTTERANCES 50 #endif #ifndef WHOLE_SIGNAL #define WHOLE_SIGNAL -1 #endif #ifndef LSMJ #define LSMJ 20 #endif #ifndef LFBANK #define LFBANK 35 #endif #ifndef DATAPADDING_MSECS #define DATAPADDING_MSECS 320 #endif #ifndef SEARCHBUFFER #define SEARCHBUFFER 75 #endif #ifndef EPS #define EPS 1E-12 #endif #ifndef MINSPEECHLGTH #define MINSPEECHLGTH 4 #endif #ifndef JOINSPEECHLGTH #define JOINSPEECHLGTH 50 #endif #ifndef MINUTTLENGTH #define MINUTTLENGTH 50 #endif #ifndef SATDB #define SATDB 90.31 #endif #ifndef FIXDB #define FIXDB -32.0 #endif #ifndef TWOPI #define TWOPI 6.28318530717959 #endif extern int Nb ; #define Nfmax 512 #define Sp_8k 2.764344e-5 #define Sl_8k 1.866055e-1 #define Sp_16k 6.910853e-006 #define Sl_16k 1.866055e-001 extern float Sp; extern float Sl; #define Dz 0.312 #define gamma 0.001 #define Tl 10000.0f #define Ts 10000000.0f #define Tt 0.02f #define Tn 0.01f #ifndef min #define min(a,b) (((a) < (b)) ? (a) : (b)) #endif #ifndef max #define max(a,b) (((a) > (b)) ? (a) : (b)) #endif #ifndef NB_MODE #define NB_MODE 0 #endif #ifndef WB_MODE #define WB_MODE 1 #endif extern long Fs; extern long Downsample; extern float * InIIR_Hsos; extern long Align_Nfft; extern long InIIR_Nsos; extern long Fs_8k; extern long Downsample_8k; extern long InIIR_Nsos_8k; extern long Align_Nfft_8k; extern long Fs_16k; extern long Downsample_16k; extern long InIIR_Nsos_16k; extern long Align_Nfft_16k; #ifndef PESQ_H #define PESQ_H #define PESQ_ERROR_SUCCESS 0 #define PESQ_ERROR_UNKNOWN -1 #define PESQ_ERROR_INVALID_SAMPLE_RATE -2 #define PESQ_ERROR_OUT_OF_MEMORY_REF -3 #define PESQ_ERROR_OUT_OF_MEMORY_DEG -4 #define PESQ_ERROR_OUT_OF_MEMORY_TMP -5 #define PESQ_ERROR_BUFFER_TOO_SHORT -6 #define PESQ_ERROR_NO_UTTERANCES_DETECTED -7 typedef struct { char path_name[512]; char file_name [128]; long Nsamples; long apply_swap; long input_filter; float * data; float * VAD; float * logVAD; } SIGNAL_INFO; typedef struct { long Nutterances; long Largest_uttsize; long Nsurf_samples; long Crude_DelayEst; float Crude_DelayConf; long UttSearch_Start[MAXNUTTERANCES]; long UttSearch_End[MAXNUTTERANCES]; long Utt_DelayEst[MAXNUTTERANCES]; long Utt_Delay[MAXNUTTERANCES]; float Utt_DelayConf[MAXNUTTERANCES]; long Utt_Start[MAXNUTTERANCES]; long Utt_End[MAXNUTTERANCES]; float pesq_mos; float mapped_mos; short mode; } ERROR_INFO; void input_filter( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, float * ftmp ); void apply_filters( float * data, long Nsamples ); void make_stereo_file (char *, SIGNAL_INFO *, SIGNAL_INFO *); void make_stereo_file2 (char *, SIGNAL_INFO *, float *); void select_rate( long sample_rate, long * Error_Flag, char ** Error_Type ); int file_exist( char * fname ); void load_src( long * Error_Flag, char ** Error_Type, SIGNAL_INFO * sinfo); void alloc_other( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, long * Error_Flag, char ** Error_Type, float ** ftmp); void calc_VAD( SIGNAL_INFO * pinfo ); int id_searchwindows( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info ); void id_utterances( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info ); void utterance_split( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, float * ftmp ); void utterance_locate( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, float * ftmp ); void auditory_transform( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id, float * ftmp); void calc_err( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id); void extract_params( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id, float * ftmp ); void utterance_process(SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id, float * ftmp); void DC_block( float * data, long Nsamples ); void apply_filter ( float * data, long Nsamples, int, double [][2] ); double pow_of (const float * const , long , long, long); void apply_VAD( SIGNAL_INFO * pinfo, float * data, float * VAD, float * logVAD ); void crude_align( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id, float * ftmp); void time_align( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long Utt_id, float * ftmp ); void split_align( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, float * ftmp, long Utt_Start, long Utt_SpeechStart, long Utt_SpeechEnd, long Utt_End, long Utt_DelayEst, float Utt_DelayConf, long * Best_ED1, long * Best_D1, float * Best_DC1, long * Best_ED2, long * Best_D2, float * Best_DC2, long * Best_BP ); void pesq_psychoacoustic_model( SIGNAL_INFO * ref_info, SIGNAL_INFO * deg_info, ERROR_INFO * err_info, long * Error_Flag, char ** Error_Type, float * ftmp); void apply_pesq( float * x_data, float * ref_surf, float * y_data, float * deg_surf, long NVAD_windows, float * ftmp, ERROR_INFO * err_info ); #endif //PESQ_H #ifndef D_POW_F #define D_POW_F 2 #endif #ifndef D_POW_S #define D_POW_S 6 #endif #ifndef D_POW_T #define D_POW_T 2 #endif #ifndef A_POW_F #define A_POW_F 1 #endif #ifndef A_POW_S #define A_POW_S 6 #endif #ifndef A_POW_T #define A_POW_T 2 #endif #ifndef D_WEIGHT #define D_WEIGHT 0.1 #endif #ifndef A_WEIGHT #define A_WEIGHT 0.0309 #endif /* END OF FILE */